Magnetrührer mit Heizplatte

< >

Heizleistung800W, Abmessungen 225x215xx115mm

Model: WH240-R

Order NO.: 400501

3872

Specific parameters will be adjusted according to product upgrades, without notice.

Quotation Request

PRODUCT OVERVIEW

Description

Eigenschaften

* Mikrocomputersteuerung zur Gewährleistung der stabilen und zuverlässigen Leistung der Ausrüstung
* Heiztemperatur, Rührgeschwindigkeit, Arbeitszeit und Überhitzungsschutz, digitale Einstellung und Anzeige der Thermometerdrehzahl
* Automatische Speicherung der letzten Satz von Arbeitsparametern, sehr praktisch für feste experimentelle Bedingungen
* Die Oberseite des Bedienfelds ist mit einem korrosionsbeständigen Flüssigkeitsführungskanal ausgestattet. Selbst wenn die Flüssigkeit spritzt, wird das Gerät nicht beschädigt.
* Versiegelte Gehäusekonstruktion, isolierte Installation der Schlüsselkomponenten, geeignet für relativ raue Bedingungen in der Laborumgebung
* Mit Verwendung einer neuen infrarotverstärkten Heizeinheit handelt es sich um einen Magnetrührer mit Hochtemperaturheizung, der eine hohe Heizleistung aufweist und schnell die für das Medium erforderliche hohe Temperatur erreichen kann.
* Wenn die Temperatur der Platte 60 ° C übersteigt, beginnt die Anzeige für hohe Temperatur zu blinken, was den Benutzer auffordert, auf die Sicherheit zu achten.

Technische Daten

Modell	WH240-R
Anzeigemodus	LCD
Bedienmodus	Digitalsteuerung / Tasten- und Knopfbedienung
Heizplattentemperatur (° C)	450
Temperaturregelbereich (mit Pt100-Sensor) (° C)	300
Temperatursteuerungsgenauigkeit (mit Pt100-Sensor) (° C)	±2
Überhitzungsschutztemperatur (° C)	50~500 einstellbar
Rührgeschwindigkeit (U / min)	100~1200
Heizleistung (W)	800
Rührmenge (L) H2O	20
Gehäuse / Plattenmaterial	One-Shot-Druckgussaluminium, Korrosionsschutzbeschichtung / Keramikglas
Plattengröße (mm)	Ø135
Abmessungen (mm)	225x215xx115
Lösung Hochtemperaturschutzvorrichtung (△ T)	50℃ ( △ T in 10~50℃einstellbar,Standardeinstellung50℃ )
Timing-Funktion	1~1999/ kontinuierlich
PID-Parameter	2 Satz von PID
Kommunikationsfunktion	USB (COM) kann den aktuellen Temperatur-Istwert ausgeben
Schnittstelle	USB
Bestellnummer	400501

Is this information helpful?

Viedos

Infrared hot plate / Stirrer_WH220-R

1 2 3

Accessories

1.110.6

Cylindrical Stir Bars

Cylindrical stir bars have a smooth and round profile. They can be used for a wide variety of applications and are the general choice for basic stirring processes.
1.210.6

Plain Stir Bars

Similar action to cylindrical but gives more turbulence at low speed.
1.513.3

Octahedral Stir Bars

Octahedral stir bars employ similar characteristics as Pivot ring stir bars but show a higher turbulence at low stirring speed
1.513

Colored Octahedral Stir Bars

Colored octahedral stir bars should be used when the identification of the stirred material is of high importance
1.802

Micro Stir Bars

Micro stir bars should be used for small and very small containers
1.802

Colored Micro Stir Bars

Colored micro stir bars should be used when the identification of the stirred material is of high importance and when the container is small or very small
1.610

Oval Stir Bars

Oval stir bars are preferentially used in flasks with round bottoms
1.3319

Octaoval Stir Bars

Octaoval stir bars are effective stir bars with characteristics similar to oval and Pivot type stir bars
1.1712

Cylindrical Stir Bars With a Removable Pivot Ring

Removable ring stir bars employ characteristics similar to cylindrical and pivot ring stir bars
1.1910

Tapered Stir Bar

Tapered stir bars have very effective stirring characteristics which are similar to those of oval and Pivot ring type
1.1335

Double Ended Stir Bar

Double ended stir bars use enlarged areas on both sides for effective and stable stirring
1.412

Triangular Stir Bars

Triangular stir bars are effective for dissolving solids and mixing sediments because of their scraper-like characteristics
1.1812

Ribbed Triangular Stir Bars

Ribbed triangular stir bars have excellent stirring characteristics at all speeds and can be used on uneven surfaces
1.1609

Tube Stirrer Magnets

Tube Stirrer Magnets is suitable for 10mm diameter standard colorimetric ware
1.1110

Crosshead Stirrer Magnets (Double Sided)

Crosshead stirrer magnets are designed for the use in tube-shaped containers. There are single sided and double sided crosshead stirrer magnets available
1.1110.1

Crosshead Stirrer Magnets (Single Sided)

Crosshead stirrer magnets are designed for the use in tube-shaped containers. There are single sided and double sided crosshead stirrer magnets available
1.2301

Hub Stirrer Magnets

Hub Stirrer Magnets can guarantee the stable mixing ability, especially suitable for low speed stirring
1.2401

Cross-Shaped Stir Bars

Cross-shaped stir bars are very stable at all speeds and can be used for general purpose stirring
1.2201.1

Test Tube Wings

Test tube wing stir bars are effective for round bottom test tubes, centrifuge tubes, and sample tubes
1.1512

Spherical Stirrer Magnets

Spherical Stirrer magnets are preferably used in tubes and for eccentric stirring
1.1206

Glass Encased Stir Bars

Glass encased stir bars can be used for the stirring of high temperature liquids (up to 275°C). They are nonreactive, leak proof, and nonabsorbent
001.0120

Extra Large Stir Bars

Extra large stir bars can used for mixing a large amount of solution, or in large capacity container sample mixing
ASTEROID 25/40/70

High-effective stirring bar

New developed, high-effective stirring bar, ideal for viscous media, stirring over wide distances or for disadvantageous vessel bottoms.
1.709

Disc-Shaped Stirrer Magnets

Disc-Shaped Stirrer Magnets is suitable for the test tube or other tubular container sample mixing